gartechmfg, Author at Gartech Manufacturing

Skinner Valve Kit replacement parts

2021-02-082021-02-08gartechmfg

This kit contains the components needed for replacing a standard Skinner Valve on the Gartech Glue System manifold. GAR-A7221 This kit includes (1) Skinner Valve, (1) 120VAC Coil, (1) 3/8″ Hex Nut, (1) 1/2″ Brass Hex Nipple, (1) 90-degree Push-Fitting…Keep readingSkinner Valve Kit replacement parts

Ball Valve Kit replacement parts

2021-02-082021-02-08gartechmfg

This kit contains the components needed for replacing a standard 1/2″ Ball Valve on the Gartech Glue System. GAR-A101P This kit includes (1) 1/2″ Ball Valve, (1) 1/2″ brass hex nipple (not shown), and (2) Swivel 90-degree push-fittings or (2)…Keep readingBall Valve Kit replacement parts

Idler Pulley Kit replacement parts

2021-01-222021-01-22gartechmfg

This kit contains the components needed for replacing an idler pulley for the timing belt on the Gartech Glue System. GAR-A2038 This kit includes (1) GAR-GU-2038 Idler Pulley, (2) Sealed Bearings, (1) GAR-GU-2039 Idler Pulley Bearing Spacer, (1) 1/2 x…Keep readingIdler Pulley Kit replacement parts

Tensioner Pulley Kit replacement parts

2021-01-222021-01-22gartechmfg

This kit contains the components needed for replacing a timing belt tensioner with idler pulley on the Gartech Glue System. GAR-A2055 This kit includes (1) GAR-GU-2038 Idler Pulley, (2) Sealed Bearings, (1) GAR-GU-2039 Idler Pulley Bearing Spacer, (1) GAR-GU-2055 Drive…Keep readingTensioner Pulley Kit replacement parts

Glue Shoe Mounting Plate Kit replacement parts

2021-01-222021-01-22gartechmfg

This kit contains all the components needed for mounting an upper or lower 7016-series Gartech Glue Shoe on the Gartech Glue System. GAR-A0002 This kit includes (1) GAR-GU2-0002 Glue Shoe Mounting Plate, (1) GAR-GU-2067 Adjustment Nut, (1) O-Ring, (4) 1/4-20…Keep readingGlue Shoe Mounting Plate Kit replacement parts

Glue Shaft Kit replacement parts

2021-01-212021-01-21gartechmfg

This kit contains a complete assembly of the glue shaft as used with glue patterns that are 3″ wide or less on the Gartech Glue System. GAR-A4069 This kit includes (1) GAR-GU-0001 End Cap, (1) 1/2-13 x 1″ Stainless Steel…Keep readingGlue Shaft Kit replacement parts

Glue Sensor Kit replacement parts

2021-01-212021-01-21gartechmfg

This kit contains a complete assembly of the current proximity sensor as found on the Glue On/Off ball valve of the Gartech Glue System. GAR-AA01H This kit includes (1) KBF8 Sensor Mounting Bracket, (2) #10-32 x 5/8″ Stainless Steel Socket…Keep readingGlue Sensor Kit replacement parts

Bulkhead Valve replacement kit

2021-01-142021-01-21gartechmfg

This kit includes a complete assembly of replacement parts for the bulkhead PVC ball valve that controls glue flow out of the reservoir of the Gartech Glue System. GAR-A4506 This kit includes (1) TF-34P-E Bulkhead fitting, (1) M3400P 3/4″ Male…Keep readingBulkhead Valve replacement kit

Float Kit replacement parts

2021-01-142021-01-21gartechmfg

This kit includes a complete assembly of replacement parts for the float switch that controls glue levels inside the reservoir of the Gartech Glue System. GAR-A7098 This assembly includes (1) 36897097 Float Switch, (1) 4551K31 Modified Float Rod, and (1)…Keep readingFloat Kit replacement parts

2021 COVID-19 Scheduling Update

2021-01-042021-01-21gartechmfg

In accordance with current restrictions, warnings from the government regarding the COVID-19 virus, and the well-being of our personnel, Gartech will not be participating in any on-site visits for sales, service, or surveying. This decision will stand until further notice.…Keep reading2021 COVID-19 Scheduling Update

Author: gartechmfg