Since our first Stand Alone Glue System was installed in 1992, the technical services department of Gartech has researched and implemented ways to make our glue units more effective, more reliable, and more beneficial to the user. The current Gartech Glue System is our most reliable system to date, offering dual-speed monitoring, advanced wash-up, touch-screen interfaces, color-coded lines, and zero energy technology to complement the use of our glue wheels and glue shoes. We’ve also reduced the size of our housing for optimum placement in a wider range of equipment. This combination of sound manufacturing and improved functionality back-up the Gartech Stand Alone Glue System’s “guaranteed gluing” commitment. We also guarantee our system the highest quality in our components.
As for gluing the tab, we offer a wide range of glue shoes and glue wheels. At present, we’ve glued tabs on corrugated boxes ranging from 3/16″ to 5″ in width. Need something special? We’ll work with you to achieve any size you need. Visit our Product Line page for an overview of equipment that runs our glue system.
If you’re already using a Glue System, we want to be sure you’re aware of other benefits we offer. Please scroll down for a list of upgrades, add-ons, and additional services available to all of our customers. Need a refresher? Check out our Tips & Techniques section for helpful hints or contact us by email to let us help.
For a closer look according to a layout of our Gartech Glue System, please see this article in our Tips & Techniques section. To read other important information related to your glue system, please keep scrolling down. Thank you!
Shoe & Wheel Redresses
We cannot stress the importance of this enough. For a cost of around 25% the price of a new glue shoe, you can send your worn glue shoes (like the one below) and glue wheels back to Gartech for our Redress Service. Depending on how much damage the working surface has sustained, we can re-machine these components to “like new” condition. The shoe on the right (below) has been redressed. The best part? Most shoes can be redressed as many as five times, depending on their condition when we receive them. Not only does this improve the performance, but it saves your plant money by not needing to buy a new shoe each time.
We do limit the number of times a wheel receives redress, as the diameter and circumference decrease each time. Under normal conditions, we offer two redresses to a wheel. Again, that saves you the cost of purchasing a new wheel each time one becomes worn, gets hit with a tool, or suffers unforeseen mayhem.
Not sure it can be redressed? Email us a pic! We’re always happy to assist, and don’t want to see our customers throwing money away. Many shoes come in with the protective teeth worn off. We can still redress the shoes, recut the teeth, and even replace the metering plate, bolt sleeve, or fittings.
Note: We do not sell metering plates as individual parts anymore. This works against the quality and precision of both the shoe and the Gartech system. Plus, a redress costs less than a metering plate in most instances, making it cost-effective to send the entire shoe to us for re-machining.
As beneficial to some of our users as a redress, this option is attractive for customers who tend to glue from one wheel. This option lets the opposite glue wheel be stored in inventory as a backup, while the pressure wheel fulfills the role of supporting the functional glue wheel. They are sold at a fraction of the cost, are machined to the same precision, and fully support the width of the glue wheel. At present, we offer these wheels in working surface widths ranging from 3/16″ up to 5″ — just like our glue shoes and glue wheels.
Using dual-encoder technology, this upgrade allows our customers to see how well the glue system matches the speed of the equipment it’s mounted on.
Offering full-color, illustrated touch screens, user-friendly settings, and the capacity to monitor run history, wheel-to-box speed, and wash-up maintenance, our most-advanced system offers peace of mind at the push of a button without the hassle of setting speed cards.
Panelview 300 Upgrade
Given technology’s rapid change, even one-time “go-to” products have become obsolete. As of 2017, we can no longer offer replacements on this user interface.
However, there is an alternative that fits into your existing panel (AC or DC) as a replacement for the Panelview 300.
Contact us for a quote!
(Does not work with Aromat panels.)
We discontinued the DC-series systems in 2004, but offer quality upgrades to keep them competitive with our modern equipment. With a package that includes a new control panel, a new drive motor, and all the various sub-components required, our technicians or your plant’s maintenance department can easily enhance your system. This change brings with it a robust design, stable performance of components, and fewer maintenance concerns.
We discuss these upgrades in our Tips & Techniques entry, “Why Upgrade Your Gartech Glue System?”
Gartech offers a wide range of pressure wheels, drain pans, and guards for your current–or somewhat outdated–system, as well as protective holders and quick-release hose fittings for glue shoes. We also offer upgrades to solenoids, ball valves, limit switches, air cylinders and a zero-energy, air-dump upgrade that is standard on all panels since 2014.
Note: We do not encourage anyone to enter the machine while it’s operational. The guards are not a way to get around your plant’s safety program.
One simple upgrade we’ve made to our system is the use of color-coded tubing for air and water. This cuts down on the confusion of troubleshooting connections and adds to the ease of letting your facility’s maintenance department handle upgrades and basic service.
Recommended Glue Formulas
While we know every plant has its preferred vendor, preferred formula, and protocols, there is one formula developed by Henkel for optimum performance with the Gartech Glue System. This is a proven formula, workable across flexo lines, tab sizes, and box speeds.
Glue System Manual
These full-color illustrated manuals cost $35 in print and $50 in digital format.
Every housing is marked with a specific serial number that lets us identify and troubleshoot your glue system. The number is found engraved on the glue housing above the upper glue wheel, or on an adhesive plate fitted to the cover near the motor on the glue housing.
After we’ve received your request, we’ll verify the information and issue a formal quote for your manual along with pricing and delivery options. We verify that every system ships with a manual in a booklet or CD-ROM format. Due to this, we will not issue free manuals.